What You Need To Make A Keshe Magravs PlasmaGenerator
1. 100 meters insulated copper wire – The image is selected a 3+ 1jording with leader of 1.5mm, this is 25 meters 4 x 25 = 100m
2. This one must isolate the self, which takes about 3 to 6 hours with a potato peels as illustrated. Therefore shown you can obtain u-insulated copper wires is a big advantage (Figure 2.1), if your time is insufficient.
3. 750 grams Caustic Soda
4. Disposable plastic gloves to protect you from yourself from Caustic Soda.
5. Various plastic containers.
6. Plastic plates or similar any bit depth and 20 cm in the recessed portion.
7. Copper plate minimum 0.6mm ca. 1kg
8. Zinc plate minimum 0.6mm ca. 1kg
9. Table Tennis balls or other hollow plastic balls that you can fill with Gans9. Screwdriver with chock’s width 15mm
10. 2 pcs. steel rods with a length of 60cm the smallest diameter should be greater than 4mm, and the larger rod least 4mm larger.
11. 2 pcs wooden planks ca. 60cm length, where a properly drilled holes in should be a 36mmx73mm
12. 1 plug she and a plug him.
13. 4 liters of distilled water or purified water.
14. Shrink Plastic stocking or insulation tape pvc
15. Screw drill opening in chocksen as big as the thickest iron rod
16. Cutter pliers tooth.
17. Shears for cutting metal plates.
18. Gas burner to heat the copper wire
19. Measuring tape or ruler
20. Iron saw for cutting the iron rods to the desired length
21. Iron file to file down the tips of iron rods that have been cut for the easiest possible extraction of coils.
22. 2 pieces. forces, if you are going to attach wooden planks to a table as shown in the picture
23. caliper for measuring the diameter external and internal
24. Spray Bottle for cleaning of salt water from the production of gans.